Update, after I restored to default, the NVR was stuck on the wizard after arriving on site, although the local IP did not change for the NVR, the port defaulted back to 80 for HTTP but not for the server port, server port remained at what I set it at. Ensure to set the port back to match whats forwarded. Adjust your sensitivity and zone settings to your liking. Note that active motion detection regions are indicated by the red squares. Click Apply to save the settings. Setting up motion detection via the web interface. Step 1. Type the IP address of your NVR on the url address box of your browser (use Internet Explorer). Title: How to Get IPC MJPEG Stream via HTTP Commands Version: v1.0 Date: 16/08/2018 Product: Cameras Page: 2 of 3 © Hangzhou Hikvision Digital Technology Co.,Ltd Purchased a Hikvision DS-2CD2012-I. The camera works with IVMS-4200 which it came with. Problem is this camera adds to another 33 cameras which is a Casey DVR system, running. on PSS on Windows. One of the other cameras is a IP camera and works with PSS aswell. To be honest IVMS is not that user friendly and PSS is much better. Configure the play performance of live view, image format and saving path of manually captured pictures. Go to System Management > System Configuration > Live View.

You can also configure the storage settings for storing imported pictures and uploaded pictures. HikCentral Professional provides four storage locations (storing on encoding devices, Hybrid Storage Area Network, Cloud Storage Server, or pStor) for storing the recorded video files of the cameras.

Setting DVR Hikvision ini meliputi setting bahasa, rekaman, format storage, setting online dan lain sebagainya. Lebih singkatnya di sini kami akan memberikan turorial singkat mengenai setting standar DVR CCTV Hikvision. Mesin perekam CCTV yang sering dipakai adalah jenis DVR Analog. Untuk yang model jenis IP bisa dibaca di artikel lain.
Let’s add the camera to the recorder. Open the Camera menu as shown in the picture below. In Camera Management section, click Custom Adding. In the next screen add your IP camera information as shown below: In our example, we added the following information: IP camera address: 192.168.1.100. Protocol: ONVIF.
Page 22 Installation Manual of Network Camera Figure 3-4 Mounting 4. Loosen the set screws with the hex key (supplied) to remove the bubble. Figure 3-5 Disassembling 5. Connect the RCA analog video output with a monitor to view the image of the camera. Loosen the lens set screw to adjust the angle of pan, tilt and rotation direction.
.
  • e0et4gy6ui.pages.dev/644
  • e0et4gy6ui.pages.dev/461
  • e0et4gy6ui.pages.dev/516
  • e0et4gy6ui.pages.dev/571
  • e0et4gy6ui.pages.dev/790
  • e0et4gy6ui.pages.dev/910
  • e0et4gy6ui.pages.dev/281
  • e0et4gy6ui.pages.dev/469
  • e0et4gy6ui.pages.dev/555
  • e0et4gy6ui.pages.dev/550
  • e0et4gy6ui.pages.dev/707
  • e0et4gy6ui.pages.dev/838
  • e0et4gy6ui.pages.dev/375
  • e0et4gy6ui.pages.dev/458
  • e0et4gy6ui.pages.dev/947

    • cara setting ip camera cctv hikvision